NOLO VR - Motion Tracking for VR/AR

NOLO首页NOLO首页
大朋E3B+NOLO使用教程手册

1.首先大家打开NOLO的包装盒,里面会看到如下配件:

pairing

2.组合NOLO定位器和头盔,准备以下配件。

pairing

3.NOLO定位器与数据线连接。

pairing

4.固定数据线与头盔。

pairing

5. 撕开NOLO定位器底座和固线器上的双面胶并进行组装粘贴。

pairing

6.组装粘贴完成后效果如下图。

pairing

注:
(1)NOLO定位器必须贴在E3头盔中间位置,否则会导致定位不准确哦;
(2)4米SteamVR线的一端插入NOLO定位器,另一端插入电脑的USB口即可;(3)SteamVR线为分别是黑线和白线,NOLO定位器和插入电脑USB口必须为同一种颜色线。

8. NOLO数据线和头盔的数据线都连接电脑后。

pairing

9. 下载最新版大朋助手(下载地址:http://www.dpvr.cn/dapengzhushou.html


10.安装启动大朋助手后,并按照大朋助手提示进行连接,如下图。

pairing pairing pairing pairing

11.到这里,助手上连接就全部完成了,接下来进行完SteamVR的房间设置就可以进行游戏了。(Steam以及Steam VR完整使用教程:http://bbs.dpvr.cn/read.php?tid=14583&fid=15


注:
(1)NOLO出厂时已完成配对,不需要校准,可以直接使用。
(2)如手柄姿态初始位置不对,请正对基站方向,双击手柄HOME键即可完成姿态校正复位。

12.如遇到NOLO配件定位不准,需要重新配对,可进行如下操作。
(1)点击NOLO头盔定位器右上角圆环标志。

pairing

(2)按照大朋助手上的提示进行操作。

pairing pairing pairing pairing pairing

13.按照以上步骤操作完成后,所有的NOLO配对工作就都完成了。
接下来就可以开始体验游戏了

Deepoon E3B + NOLO User Guide

1. Firstly, please open the NOLO packing box and you will see the following parts:

pairing

2. Please prepare the following parts to connect NOLO Headset Marker with the headset.

pairing

3. Connect NOLO Headset Marker with USB cable

pairing

4. Fix the cable and headset.

pairing

5. Use the double sides adhesive tape on NOLO Headset Marker Mount and wire retainer to assemble .

pairing

6. When the assembly completed, it will be as shown in the following picture

pairing

Please note:
(1)The NOLO Headset Marker should be at the middle of E3 Headset or the location may not be accurate.
(2)Plug 4-metre-long Steam VR cable into the NOLO Headset Marker and the USB interface of PC.
(3)There are two colours of the Steam VR cables, black and white. Please use only one cable to connect NOLO Headset Marker and PC USB port.

8. After you complete the connection of NOLO cables and headset cables to the PC

pairing

9. Download the latest Deepoon Assistance (Link: http://www.dpvr.cn/dapengzhushou.htmlhttp://www.dpvr.cn/dapengzhushou.html


10. After the installation of Deepoon Assistant, connect as Deepoon Assistant guides. As following picture shows:

pairing pairing pairing pairing

11. So far, the connection has been completed. The next step would be Steam VR room setting. (http://bbs.dpvr.cn/read.php?tid=14583&fid=15


Please note:
(1)The pairing of NOLO has been completed when it leaves factory. It can be used directly without calibration.
(2)If the position of controllers is not correct, please face toward the Basestation and double click the HOME button of controllers to complete the position correction.

12. If NOLO hardware needs the pairing , please do as follows:
(1)Press the button on NOLO Headset Marker

pairing

(2)Do as Deepoon Assistant guides

pairing pairing pairing pairing pairing

13.After completing the pairing of NOLO hardware,
you can try the VR games.